Synchronising Transmitter / Receiver - Silvercrest IAN 43150 Bedienungs- Und Sicherheitshinweise

The doorbell works on 434MHz which is a quite common frequency.
To ensure that the function gets no influenced be doorbells in the
neighborhood, the transmitter and the receiver hence have to be syn-
chronized in regard of the encryption. Every transmitter is working
with a different encryption of the signal.
Synchronise the transmitter and receiver as follows:
16 GB
43150_Funktürklingel_content_HU_CZ_SK.indd 16

Synchronising transmitter / receiver

As soon as the batteries are installed, the receiver enters synchro-
nizing mode for app. 1 minute. During the synchronizing mode,
the signal indicator
You can also manually enter synchronising mode by holding the
synchronising button
The signal indicator
approx. 1 minute, to indicate that the receiver is in synchronizing
mode.
Press the chime button
in synchronise mode. If the receiver receives the signal, the steady
blue light of the signal indicator
that the synchronization is successful.
steadily lights up in blue color.
1
for approx. 3 seconds.
5
on the receiver will steadily light up for
1
of the transmitter, while the receiver is
9
flickers 6 times to indicate
1
26.03.14 15:59