Control Techniques Commander SE Betriebsanleitung Seite 66

Brake set-up
Zero speed
threshold
51
Motor
speed
Motor
current
Motor current
threshold
52
Operation
Brake release = Drive Healthy and motor speed above zero speed threshold and motor
current above motor current threshold.
The drive healthy relay must be wired in series with the brake release relay so
that in the event of a drive trip, the motor brake is engaged.
WARNING
Great care should be taken when implementing a brake control set-up as this may
cause a safety issue depending on the application, e.g. crane. If in any doubt,
please contact the supplier of the drive for advice and information
WARNING
66
+
_
+
_
53
Threshold
hysteresis
Figure 6.9 Brake set-up logic diagram
www.controltechniques.com
Programmable
Terminal
delay time
8
54
Terminal 15
Terminal 16
0V
Commander SE User Guide
Issue Number 9
Brake
release
relay