Ezviz CS-CV120 Bedienungsanleitung Seite 9

2
Posting the Mounting Template
Tear off the mounting template and post it on a proper position.
3
Installing the Mounting Base
Drill screw holes according to the "
expansion screw into the holes.
Align the mounting base to the mounting template and secure it with screws.
If you install the device on the wooden wall, the screws can be directly pushed in and fixed.
Wooden Wall
If you want to route cables from top, drill the installation hole A
template.
" on the mounting template, and then push the
4
Cement Wall
in the middle of the