Technical Specifications; Installation And Connection; Transport The Appliance; Set Up Appliance - Salvis ProfiLine Betriebsanleitung

8.

Technical specifications

Technical specifications
Item No.
Total connected load
Cold and warm water connection
Useful capacity
Nominal capacity
Quantity of water for steam gen
erator
External dimensions LxWxH mm
Weight without filling
Appliance noise level
Technical changes reserved!
9.

Installation and connection

● Please observe the local kitchen regulations.
● Installation work must be carried out in accordance with the manufacturer's assembly instructions
and in accordance with accepted technical regulations.
● Let Customer Service install the appliances and provide instruction.
● Observe the safety instructions!
9.1

Transport the appliance

● Note the weight of the appliance.
. Transport the appliance using suitable transport equipment or lift truck.
9.2

Set up appliance

Setup
‒ horizontally and vibration free,
‒ under an extraction hood with flame-retardant filters,
‒ not on heated and combustible surfaces,
‒ not against flammable walls.
. Remove protective film from appliance. Remove residual adhesive with cleaner or benzene.
● Make sure that there is sufficient free space above the appliance! There must be no shelves or
moveable swivelling equipment above the appliance that could be pivoted over the appliance!
● Make sure there is sufficient area for movement to operate the appliance! Make also sure there is
no risk of inadvertent impact with persons when handling the appliance.
. Remove protective film from appliance. Remove residual adhesive with cleaner or benzene.
Kettle 100 litres
PL881035
20 kW
G 3/4
100 litres
115 litres
Approx. 45 litres
800 x 900 x 750/900 mm
Approx. 120 kg
less than 70dB (A)
Kettle 150 litres
PL881036
25 kW
G 3/4
150 litres
170 litres
Approx. 45 litres
800 x 900 x 750/900 mm
Approx. 145 kg
en
31 / 56