Tascam DR-44WL Bedienungsanleitung Seite 3

Setting the XRI information recording function
(4CH mode only)
When recording in the BWF file format, the unit can also record XRI information
(eXtended Recording Information), which includes the input volume and other
recording settings.
Press the MENU button to open the
1.
Use the wheel to select
2. SYSTEM
button.
The screen opens.
SYSTEM
Use the wheel to select
3. XRI MODE
/ button.
Use the wheel to set the XRI information recording mode.
4.
Options:
: XRI information not recorded
OFF
(default): Record only XRI information
ON
: Record XRI and GPS information
ON+GPS
Press the ENTER/MARK button to confirm the setting and reenable
5.
setting item selection.
When finished making the setting, press the 8/HOME button to return
6.
to the Home Screen.
CAUTION
GPS information is acquired from the dedicated app (TASCAM DR
CONTROL). This information cannot be acquired when using the unit
without the app. Information acquired is as follows.
"LATITUDE": Latitude data
"LONGITUDE": Longitude data
Screen.
MENU
, and press the ENTER/MARK or /
, and press the ENTER/MARK or
DR-44WL
Viewing XRI information (4CH mode only)
You can check XRI and GPS information recorded in a BWF-compliant WAV file
on the screen.
XRI
Follow these procedures to open the
Use the . and / buttons or the
1.
with information that you want to view.
While the Home Screen is open when stopped, press the QUICK button
2.
to show the quick menu pop-up.
Use the wheel to select .
3. XRI
Press the ENTER/MARK button to open the
4.
following XRI information.
If no information has been recorded,
Use the . and / buttons to switch between tabs to view XRI
5.
information for each track. Select the
information about the unit
Press the 8/HOME button to return to the Home Screen.
6.
screen.
XRI
screen to select the file
BROWSE
screen that shows the
XRI
is shown
No Data
tab to view the following
OTHERS
TASCAM DR-44WL
3