EBS HANDJET 250 Bedienungsanleitung Seite 27

installed together with the control
program.
It is possible to download other crea-
tors offered on the web site of
EBS Ink-Jet Systems.
Connecting the Printer to a
Computer (via RS-232 Interface)
H
See figure .
The other elements of the portable printer
system:
36. RFI Module for wireless (radio) com-
munications with an RS-232 inter-
face.
37. Cable for series communications
between a computer (via COM port)
and the RFI Module (via RS-232).
38. Socket to connect a cable from a
communications port in the computer.
39. RFI Power socket (with RS-232).
40. LED indicator to indicate radio trans-
mission in the RFI Module.
As an alternative to module
USB) you can use RFI Module
communicates via RS-232.
1. Find an unoccupied
(COM) in your computer.
2. Connect the port COM of your com-
puter with socket
37
cable
H
29
26
20050316#1.0
23
(RFI via
36
that
series port
38 36
in module via
36
27
39
EBS Ink-Jet Systems
36
3. Install module
the optimal range for radio transmis-
sion is ensured.
Do not cover module
essary shields or objects, especially
metal ones. Ideally, place module
!
at a certain height, to avoid any
obstacles between the printer and
36
module .
4. Insert connector
39
to power socket
connect the power pack to a wall out-
let.
5. Switch the printer on.
6. Start the control program. The pro-
gram identifies the printer and if it
communicates with the printer suc-
cessfully, the following message is
displayed: Printer is
7. Click the Initialization
to view the printer configuration. If an
O.K. message is displayed, data
have been transmitted correctly.
If you find it difficult to communicate
with the printer, try and configure it
once again in the system. Start the
!
Network configuration
the Guides menu and follow the
instructions.
1 5
6 9
COM
37
40
38
in such a way that
36
with unnec-
36
27 26
of power pack
36
of module and
found.
button in order
creator from
30
27
EN
EN