How To Create A Text To Be Printed; How Toc - EBS HANDJET 250 Bedienungsanleitung

2. After the program MENU has
been displayed, choose the in-
stallation option.
3. Follow the instructions displayed
during the installation.
4. After all control program compo-
nents and USB drivers required
have been installed, you can
communicate with your printer via
a radio link - see
EN
Printer with a Computer (via USB
interface)
Starting the Control Program
1. Click the EBS printer icon on the
control panel or, if there is no
such an icon, start EBS-200.exe
from the folder where the control
program
(C:\Program Files\ EBS_printers\
EBS-200\ as standard).
2. Once started, the control pro-
gram automatically activates the
find-the-printer(s) function and
signs the printer on, if the printer
is on and the radio communica-
tions link operates properly.
Connecting the Printer with a
Computer (via USB interface)
See figures
The printer communicates with the
computer through module
radio link. The module uses an USB
interface or optionally a RS232 inter-
face to communicate with the com-
puter - see
Computer (via RS-232 Interface)
1. Find a free USB port in your
computer.
2. Use cable
port in your computer with socket
24 of module 23.
12
EN
Connecting the
.
has been installed
B D F
, and .
23
Connecting the Printer to a
.
28 to connect the USB
EBS Ink-Jet Systems
If USB drivers of module
been installed during the installation
of the control program (see
the Control Program
!
is automatically detected and in-
stalled on your computer. Otherwise
you are prompted to indicate the
location of the drivers on the CD.
3. Fix module
order to reach the widest radio
transmission range.
Do not cover module
essary shields or objects, especially
metal ones. Optimally, place module
!
23
at a certain height, to avoid any
obstacles between the printer and
module
4. Switch the printer on.
5. Start the control program. The
program will find the printer,
communicate with it and display
a Printer is found
6. Click the
view the printer configuration.
Data
properly if an
displayed in the transmission
status window.
If you cannot communicate with the
printer, try to configure it in the sys-
! tem once again. From the
menu start the
tion creator and follow the creator's
via a
prompts.
Text Files and Print Pa-
rameters
How to Create a Text to be
Printed?
Regular Text
See figure
Insert texts in the text edit line in the
edit window.
23
Installing
), then the module
23 appropriately in
23
with unnec-
23
.
message.
Initialization button to
have been transmitted
O.K. message is
Network configura-
G
.
20050316#1.0
have
Guides