Intended Use; Operation - Bosch MFQ36 series Gebrauchsanleitung

en Intended use

Intended use

This accessory is designed for the hand mixer MFQ36... .
Follow the operating instructions for the hand mixer.
Do not use the stand for other hand mixers.
When using the stand, only use the tools supplied with the
appliance.
This accessory is only suitable for kneading dough, whisking egg
whites and beating cream and light dough.
The accessory must not be used for processing other objects or
substances.
Safety instructions
W Risk of injury!
Before attaching or removing the hand mixer, wait until the drive has
come to a standstill and pull out the mains plug.
W Important!
It is essential to clean the accessory thoroughly after each use or
after it has not been used for an extended period. X "After using
the appliance/cleaning" see page 7

Operation

For kneading dough, whisking egg whites
and beating cream and light dough.
Maximum processing quantity
X "Recipes" see page 7
■ Place the stand on a smooth and level
work surface.
■ Press release button and swivel up the
support (1).
■ Place bowl from the side on the stand
base (2).
Important: Close the rear aperture on
the hand mixer before placing on the
stand. When the rear aperture is open,
the appliance can be operated using
instantaneous switching only. Selector
switch 1-5 will not function. Move slider for
actuating the lock in switch position P
only.
6
■ On the hand mixer:
Move slider to position w. The
apertures for inserting the tools are open,
and the rear aperture is closed (3a).
■ Insert required tool pair (stirrers or
kneading hooks) into the hand mixer
and press into position (3b).
Caution!
Note the shape of the plastic parts on the
tools to avoid mixing them up.
■ Insert hand mixer stand into the back
of the support (4).Press hand mixer
down until it engages (5). Ensure that
the worm gear and gear wheel mesh
correctly!
■ Press release button and swivel down
the support (6).
■ Plug into the mains (7).
■ Move the switch to the desired position (8).