Maintenance - STIEBEL ELTRON DCE 13 Bedienung Und Installation

INSTALLATION

Maintenance

Activating the safety switch (AE 3)
Registering / deregistering the wireless remote control at the
DCE 11/13 RC
1 Key for registering and deregistering
2 Yellow LED illuminates when wireless remote control is
activated
f To start registration of the wireless remote control briefly f
press the key. The yellow LED starts to flash. Now press key
"1" on the wireless remote control. A brief flashing of the LED
indicates that registration was successful. The yellow LED
then extinguishes.
f To deregister the wireless remote control press the key for f
5 seconds. A brief flashing of the LED indicates that deregis-
tration was successful. The yellow LED then extinguishes.
Plug-in position of the wireless remote control for
DCE 11/13 RC
www.stiebel-eltron.com
14. Maintenance
Draining the appliance
For maintenance work or when there is a risk of frost drain the
appliance as follows:
f Close the shut-off valve in the cold water inlet pipe. f
f Open the draw-off valve. f
f Undo the water connections on the appliance. f
1
Cleaning or replacing filter/flow limiter
2
1 Strainer
2 Flow limiter
f Remove the filter and flow limiter with the aid of a pointed f
object or suitable pliers.
Appliance storage
f Store the dismantled appliance in a room free from the risk f
of frost, as water residues remaining inside the appliance can
freeze and cause damage.
WARNING Electrocution
Before any work on the appliance, disconnect all poles
from the power supply.
WARNING Scalding
Hot water may escape during the draining process.
1
2
DCE 11/13 | 29