Mitsubishi Electric EHST20C-VM6HB Installationshandbuch Seite 31

5
System Set Up
<Main Controller Menu tree>
Initial
Main screen
Main menu Service
Continued from the previous page.
(Password protected)
Manual operation
Function settings
Thermistor adjustment
Auxiliary settings Economy settings for pump
Electric heater (Heating)
Electric heater (DHW)
Mixing valve control
Pump speed
Heat source setting Standard (Heat pump & electric heater)/Heater (Electric heater only)/
Boiler/Hybrid (Heat pump & heater/Boiler)
Operation settings Freeze stat function
Simultaneous operation
Cold weather function
Room temp. control (Heating)
Boiler settings
*2
Floor dry up function
(For more details,
refer to Page 41.)
External input settings Demand control
Running information Outdoor thermostat
Thermistor reading
Summary of settings
Error history
Password protection
Manual reset Main controller
FTC
SD card SD Main RC
Main RC SD
*2 For more details, refer to the installation manual of PAC-TH011HT-E.
ON/OFF
Delay
ON/OFF
Delay
ON/OFF
Delay
Running
Interval
Flow t.
Outdoor ambient temp.
ON/OFF
Outdoor ambient temp.
ON/OFF
Outdoor ambient temp.
Temp. control interval
Flow temp. range Min. temp.
Max. temp.
H/P thermo diff. adjust ON/OFF
Lower limit
Upper limit
Hybrid settings Outdoor ambient temp.
Priority
Intelligent settings Energy price
Schedule
CO emission
2
Heat source
ON/OFF
Target temp. Start & Finish
Max. temp.
Max. temp. period
Flow temp. (Increase) Temp. increase step
Increase interval
Flow temp. (Decrease) Temp. decrease step
Decrease interval
OFF (Heat source)/Boiler
Heater/Boiler
Yes/No
Yes/No
Select download data
Select upload data
Unrestricted access
Installer only
Ambient/Cost /CO2
Electricity
Boiler
Electricity
Boiler
Heat pump capacity
Boiler efficiency
Booster heater 1
capacity
Booster heater 2
capacity
30