Recommended Abrasive And Diamond Cutting Blade, Specification; Ec Declaration Of Conformity - Husqvarna K 1270 series Bedienungsanweisung

Recommended abrasive and diamond cutting blade, specification
Cutting blade
diameter, inch/mm
14" (350 mm)
16" (400 mm)

EC Declaration of Conformity

(Applies to Europe only)
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46-36-146500, declares under sole responsibility that the power
cutters Husqvarna K 1270, K 1270 Rail from 2016's serial numbers and onwards (the year is clearly stated in plain text
on the rating plate with subsequent serial number), complies with the requirements of the COUNCIL'S DIRECTIVES:
• of May 17, 2006 "relating to machinery" 2006/42/EC.
• of February 26, 2014 "relating to electromagnetic compatibility" 2014/30/EU.
• of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC.
For information relating to noise emissions, see the Technical data chapter.
The following standards have been applied: EN ISO 12100:2010, EN ISO 14982:2009, CISPR12:2007+AMD1:2009,
EN55012:2008+A1:2009, EN ISO 19432:2012
Notified body: 0404, SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has performed voluntary
type examination in accordance with the machinery directive (2006/42/EC) on behalf of Husqvarna AB. The certificate
has the number: SEC/10/2287
In addition, SMP, Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has certified conformity with
annex V of the Council's Directive of May 8, 2000 "relating to the noise emissions in the environment" 2000/14/EC. The
certificate has the number: 01/169/035 - K 1270, K 1270 Rail
Gothenburg, 25 April 2016
Joakim Ed
Global R&D Director
Construction Equipment Husqvarna AB
(Authorized representative for Husqvarna AB and responsible for technical documentation.)
32 – English
TECHNICAL DATA
Max cutting Blade speed
depth, mm/inch rating, rpm
118/4,6
145/5,7
Blade speed
rating,
m/s / ft/min
5500 100/19600
4775 100/19600
Blade center hole
diameter, mm/inch thickness,mm/inch
25,4/1 or 20/0.79
25,4/1 or 20/0.79
Max blade
5/0,2
5/0,2