Canceling Volume Limit - Pioneer XW-SX70 Bedienungsanleitung

Contents

Canceling Volume Limit

Press repeatedly
Illumination LED
Preparations
≫ ≫
3"
(LIGHTING)
21
Playback Voice Functions
≫
You can cancel the upper limit setting for volume
when playing music. When you cancel the upper
limit for the volume, the maximum volume increases
from 45 to 50.
• This feature is available after firmware update
and on devices with new firmware installed
during manufacture. If operation is not possible,
refer to Firmware Update (
the firmware.
1. Repeatedly press the INPUT button until the
"AUX" LED lights, and change the input source
to "AUX".
2. Press and hold the INPUT button for about 3
seconds to cancel the setting. When the setting
is canceled, the front panel illumination LED
blinks red twice. When you press and hold the
INPUT button again for about 3 seconds, the
front panel illumination LED blinks blue twice and
the Volume Limit is enabled.
• The volume setting can still be set between 46 to
50 when Volume Limit is enabled, but the volume
actually output will remain at 45.
• Depending on the track, abnormal sound may
be generated when playing at or near maximum
volume with the Volume Limit turned off.
Top Panel≫ Front Panel≫ Rear Panel≫
Setup
≫ ≫
p31) to update