Denon DJ Prime 4 Schnellstartanleitung Seite 3

Setup
Important: Occasionally, we may update Prime 4's firmware to add exciting new features and improvements. Visit
denondj.com to check for available firmware updates, especially after you update your software (firmware updates
may address new software features).
1. Visit denondj.com and log into your account. (Create an account if this is your first Denon DJ product.)
2. In your account, download and install the latest version of Engine.
3. Connect input sources (microphones, CD players, etc.) to Prime 4.
4. Connect output devices (headphones, power amplifiers, loudspeakers, etc.) to Prime 4.
5. Plug all devices into power sources, and turn on devices in proper order:
• When starting a session, turn on (1) input sources, (2) Prime 4, (3) output devices.
• When ending a session, turn off (1) output devices, (2) Prime 4, (3) input sources.
6. To use Engine (standalone playback): Insert a USB flash drive or SD card (with an Engine-configured music
library) to one of Prime 4's USB ports or SD Card Slot.
Computer
(optional)
Hard Drive
Power
Items not listed under the
Smartphone
or Tablet
Powered Loudspeakers
Introduction > Box Contents
Booth Monitors
are sold separately.
Media Player
Turntable
Headphones
(front panel)
Microphone
3