Trouble Shooting In Photo Frame Mode - miniland baby digimonitor 8" plus Bedienungsanleitung

Use the USB cable to connect your digital picture frame to a computer
to transfer files between the two devices (drivers are not needed).
With the frame turned off, connect the small end of the cable to the frame and the
large end to your computer. Turn the frame on and allow the computer a few
moments to recognize the device. The frame's internal memory and any memory
cards inserted in the frame will appear as external storage devices on the computer.
Compatible picture, audio files can be copied to the internal memory or memory
cards in the frame through normal copy-and-paste or drag-and-drop methods.
The frame must be disconnected from the computer to display photos or play music.
After it has been disconnected, the Monitor will return to the previous play mode.
5.2.3. MONITORING USING THE COMPUTER
This baby monitor also offers the possibility to monitor your baby directly
from your computer.
To start enjoying this application, please follow the steps below:
- Plug the USB receiver to the USB socket of your computer.
- Turn the camera ON.
- Open your web browser and go to: www.minilandbaby.com
- Select "eMyBaby" from the main menu of the Web, and live the eMyBaby
experience with your baby!
5.2.4. TROUBLE SHOOTING
In PHOTO FRAME mode:
Problem
Displays
unrecognizable code
Cannot insert
memory cards
Cannot save files
Dark screen
Possible Cause – things to do/check
Check if the correct language option has been set. Set the language
selection in the Setup menu.
The card has been inserted in the wrong direction.
Insert the cards in correct direction.
The flash capacity is not large enough. Restart the unit, delete some
files, or format the flash memory.
Unit doesn't turn on or AC adapter connection is incorrect.
Check if the unit is turned on or AC adaptor is properly connected.
English