miniland baby digimonitor 3.5 touch Bedienungsanleitung Seite 37

ENGLISH
PHOTO
Select photos and click the icon to take a photgraph.
5.2.6.3. QUAD/CHANNEL (Figure 5 )
This baby monitor allows you to link up to 4 cameras to a single monitor. Click on the icon
on the main menu (t) to access the submenu QUAD/CHANNEL.
To choose the camera whose image you want to display at any given time, click on the
relevant icon. You can also select the camera to be displayed by clicking on the icon (a)
on the home screen (o).
One of the main features of this baby monitor is that you can view up to 4 cameras
simultaneously, thanks to its "QUAD VIEW" function. Simply click on the icon and the
screen will be divided into four parts, each quadrant showing the image from one of the
cameras. To view one of the images in full screen mode, click on the image concerned.
If you prefer the monitor to display the image of each camera cyclically, click the icon. To
set the auto switch parameters, access the option "auto switch time" on the MonitorSetting
menu, which is explained below.
5.2.6.4. NIGHTLIGHT (Figure 6 )
To turn on the camera nightlight, click the icon in the main menu (t). A submenu appears
showing the nightlight for each of the 4 possible cameras.
Click on the icon of the desired camera and the bulb will turn on and off as does the
nightlight.
You can also turn the camera light on and off by clicking the icon (e) on the home screen
(o). The icon will appear with the word ON or OFF, depending on whether the nightlight of
the camera shown in the image is on or off.
5.2.6.5. LULLABIES (Figure 7-8 )
You can soothe the baby to sleep by playing a gentle lullaby from the baby unit. To enable
this feature, click the icon in the main menu (t).
First, choose the camera where you want the melody you select to be played.
After selecting the camera, click the icon of your choice to play one of the 4 lullabies
available or turn off the music if it has been activated previously.
You can choose three volume levels to create an ideal atmosphere for the relaxation or fun
of your baby.
It is also possible to activate the lullabies in the camera whose image is displayed on the
monitor by clicking the icon (d) on the home screen (o). This icon will appear along with the
number of the lullaby selected of a red cross if the function is disabled.
5.2.6.6. VOX MODE (Figure 9-10 )
This mode allows you to control the sound activation of your baby monitor. If you activate
the VOX mode on the monitor and there is no sound around the camera, it stops
transmitting. However, it continues to pick up sounds using a minimum level of power. The
monitor screen turns off when the camera is not transmitting. When the camera detects
any sound louder than the set sensitivity level it will start transmitting the signal to the
monitor again.
If you want to see your baby at any given time, even if there is no background noise, touch
the screen and the image will be activated again.
To disable this feature and see the area monitored continuously, turn off the VOX mode on
the monitor.
37