Inateck BCST-32 Bedienungsanleitung Seite 2

English
User Manual
Installation and Usage
1) Connect the scanner BCST-32 to the USB interface in the comput-
er (Refer to the above diagram)
2) BCST-32 beeps twice when the connection is ok.
3) Open the document on the computer and place the cursor
where you input the barcode information; then the information
will be displayed on the computer when you scan the barcodes.
Green LED flashes with one beep reminder when scanning one
time.
Scanning Method
1) Maintain a certain bevel between the scanner BCST-32 and the
barcode to achieving the best reading effect
2) The scanner must align at the barcode and the beam must cover
the whole barcode so that the information could be correctly
decoded. Error may occur when partially decoding.
Right way to read the barcode
Wrong way to read the barcode
1