Activation Of The Led Illuminator Via An External Dusk Switch; Activation Of The Led Illuminator Via The Integrated Dusk Sensor - Videotec ULISSE MAXI Bedienungsanleitung

8.12.2 Activation of the LED illuminator
via an external dusk switch
Perform the following operations:
• Connect the twilight switch to the terminals: LNO/
AGND (8.5.3 Connection of the alarm inputs, of the
twilight switch and of the relays, page 26).
• Adjust the left illuminator (MASTER):
• Lighting threshold: Set the value to the
minimum (8.12.4 LED illuminator switching on
threshold adjustment, page 32).
• Infrared power: Set the value as needed (8.12.5
LED illuminator power adjustment, page 32).
• Adjustment of the the illuminator on the right
(SLAVE):
• Lighting threshold: Set the value to the
maximum (8.12.4 LED illuminator switching on
threshold adjustment, page 32).
• Infrared power: Set the value to the minimum (
8.12.5 LED illuminator power adjustment, page
32).
• Combine the External value with the IR Probe entry
of the ZFI Parameter menu (10.1.5 ZFI Parameter
Menu, page 42).
ZFI CAMERA SETTINGS
------------------------
1>ZOOM
3 IR PROBE
4 ZONE TITLING
5 ZONE MASKING
Fig. 57
MNVCUPTMAXB_1511_EN
: 30x
: EXT.
>
>
8.12.3 Activation of the LED illuminator
via the integrated dusk sensor
To synchronise the unit with the LED illuminators it is
necessary to:
• Adjust the left illuminator (MASTER):
• Lighting threshold: Set the value as needed (
8.12.4 LED illuminator switching on threshold
adjustment, page 32).
• Infrared power: Set the value as needed (8.12.5
LED illuminator power adjustment, page 32).
• Adjustment of the the illuminator on the right
(SLAVE):
• Lighting threshold: Set the value to the
maximum (8.12.4 LED illuminator switching on
threshold adjustment, page 32).
• Infrared power: Set the value to the minimum (
8.12.5 LED illuminator power adjustment, page
32).
• Combine the Internal value with the IR probe entry
of the ZFI Parameter menu (10.1.5 ZFI Parameter
Menu, page 42).
ZFI CAMERA SETTINGS
------------------------
1>ZOOM
3 IR PROBE
4 ZONE TITLING
5 ZONE MASKING
Fig. 58
: 30x
: INT.
>
>
31