Reverse Burst; Cloning Radios Using The Cps Cloning Cable Kit P/N Hkkn4028 - Motorola CLK446 Handbuch

To use this feature, the Call Tones must be
programmed via the CPS. Call Tone can be
sent by pressing the MON button.

Reverse Burst

Reverse Burst eliminates unwanted noise
(squelch tail) during loss of carrier detection.
Notes:
• The features described in previous pages
are just some of the features CPS has.
CPS offers more capabilities. For more
information refer to the HELP file in the
CPS.
• Some of the features available with the
CPS software may vary depending on the
radio model.
CLONING RADIOS
You can clone CLK446 radio profiles from one
source radio to a target radio.
• Source Radio: Radio to be cloned.
• Target Radio: Radio to which the
configuration of the Source Radio is to be
copied.
Cloning can be done by using any one of the
following methods:
• A Radio-to-Radio cloning cable (optional
accessory),
• the CPS (free software download).
Cloning Radios Using the CPS Cloning
Cable Kit P/N HKKN4028_ (optional
accessory)
Operating Instructions
1. Before starting the cloning process, make
sure you have:
• A fully charged battery on each of the
radios.
• Turn OFF the radios.
27
English