Headrest - Sunrise Medical SOPUR Easy 200 Gebrauchsanweisung

Option Elevating legrest
(Fig.5.20.3 - 5.20.5)
To remove, pull the lever (1), swing the footplate outwards and
then lift the legrest out.
Height Adjustment:
The lower leg length can be adjusted infinitely by releasing the
screw (2). Adjust the suitable height and tighten the screw
again.
CAUTION!
The distance between the footplate and the ground must be at
least 40 mm.
Angle Adjustment:
Press the lever (3) downward with one hand while supporting
the legrest with the other hand to take the load off. When a
suitable angle is achieved, let go of the lever and the legrest will
lock into one of the preset positions.
WARNING!
• Keep hands clear of the adjustment mechanism between the
frame and the movable parts of the footrest while elevating or
lowering the footrest.
• The footrests should not be used to lift or to carry the
wheelchair.
• Risk of trapping fingers!
• When moving the footrest up or down, do not put your fingers
in the adjusting mechanism between the moving parts of the
footrest.
Fig. 5.20.3
1
3
EASY 200-300,
18
Fig. 5.20.4
2
Fig. 5.20.5
Lightweight footrest
The footrest angle can be adjusted by loosening the screws
(2). Side protection panels can be fitted to the footrest using
the mounting holes (3). These prevent the feet slipping off
accidentally, (Fig. 5.20.6). Make sure that after any adjustment
work, all screws are tightened correctly (see the page on
torque).
3
2

Headrest

Headrest (Fig. 5.21)
The headrest can be raised
and moved both forwards and
backwards. To do this, simply
loosen the screw (1 or 2), adjust
to the desired posi tion, and
tighten the screw (see the page
on torque).
Fig. 5.20.6
3
2
Fig. 5.21
1
2