Checking The Connection Status; Video Mode - Sony PCS-UC150 Bedienungsanleitung

Checking the Connection Status

1
Press the MENU button on the
Remote Commander.
The Menu (System Configuration)
menu appears on the monitor
screen.
2
Select COMMUNICATION with
the joy stick on the Remote
Commander, then press the stick.
The COMMUNICATION
STATUS menu appears on the
monitor screen.
Communication Status
A
LINE I/F BRI
ISDN RATE 2 x 64K
(Encode) (Decode)
AUDIO MODE G. 728 G. 728

VIDEO MODE

H. 261 H. 261
CIF CIF
PRAME RATE 15fps 15fps
3
Check the communication status:
The column A indicates the status
via the ISDN A jack; B indicates
via the ISDN B jack; C indicates
via the ISDN C jack. And the
column ENCODE indicates the
status being sent, the columns
DECODE indicate the status
being received.
LINE I/F: Displays the line
interface being used.
ISDN RATE: Displays the
number of lines and the
transfer rate being used.
AUDIO MODE: Displays the
audio encoding system.
B C
BRI BRI
2 x 64K 2 x 64K
(Encode) (Decode) (Encode) (Decode)
G. 728 G. 728 G. 728 G. 728
H. 261 H. 261 H. 261 H. 261
CIF CIF CIF CIF
15fps 15fps 15fps 15fps
Exit: CANCEL
VIDEO MODE: Displays the
video encoding system.
FRAME RATE: Displays the
maximum rate of the motion
picture.
4
Press the CANCEL button on the
Remote Commander twice.
The menu disappears from the
monitor screen.
23