Moser 1884 Originalbetriebsanleitung Seite 14

ENGLISH
Maintenance
de
Warning! Injuries and material damage due to
incorrect handling.
en
f Switch off the appliance before cleaning it or per-
forming any maintenance. Disconnect the charg-
ing stand from the power supply.
fr
Cleaning and care
it
Danger! Electric shock due to penetration of
liquid.
es
f Do not immerse the appliance in water!
f Do not allow any liquid to get inside the appliance.
pt
f Only reconnect the appliance to the power supply
if it is completely dry.
nl
Caution! Danger from aggressive chemicals.
Aggressive chemicals could damage the appliance
da
and accessories.
f Never use solvents or scouring agents.
f Only use cleaning agents and blade set oil recom-
sv
mended by the manufacturer.
no
· Accessories and spare parts are available from
your dealer or our service centre.
fi
f Remove the attachment comb (Fig. 6ⓑ) and lift the blade
set out of the housing (Fig. 7ⓐ). Use the cleaning brush
tr
to remove any cut hairs from the housing opening and
from the blade set (Fig. 8). The cleaning lever can also be
pl
pressed. This allows the cut hairs that accumulate between
the bottom blade and the top blade to be easily removed
using the cleaning brush (EASY CLEANING).
cs
f Only wipe the appliance with a soft, slightly damp cloth.
f Clean the blade set regularly using the hygienic spray.
sk
f Oil the blade set with the blade set oil (Fig. 9).
· For a good and long-lasting cutting performance, it
hr
is important to oil the blade set frequently.
· If the cutting performance deteriorates after long
hu
use despite regular cleaning and oiling, the blade
set should be replaced.
sl
Oil and cleaning indicator
The appliance should be cleaned and oiled regularly to guar-
ro
antee a longer operating life. To give you advance notice of
an urgent need for maintenance care, the appliance has been
bg
equipped with an oil and cleaning indicator. When the oil and
cleaning indicator (D) lights up, the blade set urgently needs
to be serviced and oiled to prevent premature wear to the
ru
appliance.
uk
Changing the blade set
1. Switch the appliance off using the on/off switch (Fig. 3) and
et
disconnect from the power supply.
2. Slide the blade set off the housing in the direction of the
lv
arrow (Fig. 7ⓐ). Remove the blade set.
3. Replace the blade set by hooking it into the housing and
pressing it down until it clicks into position (Fig. 7ⓑ).
lt
el
ar
14
Problem elimination
Blade set is cutting badly or pulling hair out.
Cause: Blade set is dirty or worn out.
f Clean and oil the blade set (Fig. 8/9); if this does not
resolve the problem, replace the blade set (Fig. 7).
Skin injury
Cause: Too much pressure on the skin.
f Reduce pressure when cutting close to skin.
Cause: Damaged blade set.
f Check whether the blade edges were damaged during use
and replace the blade set if necessary.
Battery operating time is too short.
Cause: Blade set and housing opening are dirty.
f Clean and oil the blade set (Fig. 8/9).
Cause: Battery power indicator is imprecise.
f Fully discharge the appliance before fully recharging it in
one uninterrupted charging process.
Cause: Battery is worn out.
f Have the battery replaced at a service centre.
Battery power indicator light does not light up.
Cause: Appliance has not been correctly placed on the charging
stand.
f Ensure that the hand-held appliance has been correctly
placed on the charging stand.
Cause: Defective power supply.
f Ensure that the plug-in transformer is plugged into the
mains socket.
f Check the mains cable for possible damage.
Disposal
Handle with care! Environmental damage in the
event of incorrect disposal.
f Discharge batteries prior to disposal!
f Correct disposal will ensure environmental protec-
tion and prevent any potentially harmful impact on
people and the environment.
Adhere to the relevant legal requirements when disposing of
the appliance.
Information on the disposal of electrical and electronic
appliances in the European Community:
Within the European Community, national regulations
are specified for the disposal of electrical appliances,
based on EU Waste Electrical and Electronic Equip-
ment Directive 2012/19/EC (WEEE). In accordance
with this, the appliance can no longer be disposed of
with the local or domestic waste.
The appliance will be accepted free of charge by local
collection points or recycling centres.
The packaging for this product is made from recy-
clable materials. Dispose of this in an environmentally
friendly manner by recycling it.