Ambu I.V. Trainer Bedienungsanleitung Seite 8

Draw fluid into the 50 ml syringe supplied and connect the syringe to the levelling
tube (fig. 6). Inject the fluid slowly into the fluid reservoir of the arm. Repeat until
fluid emerges from the overflow tube and enters the receptacle (fig. 7). The capacity
of the infusion arm is approx. 260 ml.
Remove the overflow tube from the connector (fig. 8).
Withdraw approx. 20 ml into the syringe and disconnect the syringe from the
levelling tube. This is done to ensure that the fluid reservoir can contain the liquid
supplied during training of infusion.
Now reconnect the levelling tube to the tube connector (fig. 9).
8
fig. 6
fig. 8
fig. 7
fig. 9