Starting-Up; Safety Hints; Maintenance; Regular Check - Elinchrom Ringflash 3000 Gebrauchsanleitung

Starting-up

Safety hints for operation with Ringflashes
To avoid damage of the flash connectors please always switch off the power pack, before
connecting or disconnecting the Ringflash or other Flashheads.
Caution
Ringflashes heat up during longer operation. To avoid injuries, handle with isolating cloth
or wait till parts have cooled down.
Acclimatizing
When moving the Ringflash from one climatic zone to the next, the appliance should
stand in the room, in which it will be operated, for some time before starting it up. This
prevents internal shortcuts caused by eventually condensing water.

Maintenance

Ringflashes do only need very few maintenance by the user. The unit should be dry
cleaned from dust from time to time. Before cleaning the Ringflash switch the power
pack off before disconnecting.
Caution
Under no circumstances is any part of the equipment to be opened. The equipment is
not user serviceable and there is dangerous high voltage. In the event of difficulty notify
your dealer.

Regular check

National safety regulations require frequent safety checks of the electrical equipment.
Ringflashes should be checked once a year. This check not only guarantees safety, it
also protects the value of the unit.

Return to customer service

To achieve a maximum protection of the unit sending it in for service, the original
packaging should be kept.
8