Sony BVP-900 series Bedienungsanleitung Seite 14

Location and Function of Parts
#£INTERCOM 1 and INTERCOM 2 connectors
(XLR 5-pin)
• Connect an XLR 5-pin-type headset. The
INTERCOM 1 connector can be used for
communication even if the power to the camera is
turned OFF on the CCU-700A. You can use the
INTERCOM 2 connector for an RTS intercom
system by installing an optional BKP-7913 RTS
Intercom System Kit, and two RTS Belt-pack can be
connected.
• You can monitor playback audio from the VTRs
when using the BVP-900 as a stand-alone unit.
#¢ INTERCOM (intercom volume) control
Adjusts the output level of the intercom.
#∞ REVERSE switch
Reverses the left and right channels of the intercom
signals.
#§ PGM (program audio level) control
• Adjusts the output level of the program audio.
• This control adjusts the level of the playback audio
signals of the VTR when the BVP-900 is used as a
stand-alone camera.
12 (E)