Troubleshooting; Disposal - Dometic Waeco BordBar TF-08 Bedienungsanleitung

_TF-08.book Seite 16 Freitag, 24. September 2010 4:31 16

Troubleshooting

8 Troubleshooting
Fault
Your cooler does not work
(plug is inserted).
The cooler does not cool
(plug is inserted).
Operation with a
12 V socket
(cigarette lighter):
The ignition is on and the
cooler is not working.
Pull the plug out of the
socket and make the fol-
lowing checks.
9

Disposal

➤ Place the packaging material in the appropriate recycling waste bins
wherever possible.
If you wish to finally dispose of the device, ask your local recycling
centre or specialist dealer for details about how to do this in accord-
ance with the applicable disposal regulations.
16
Possible cause Suggested remedy
There is no voltage The ignition must be switched on in
flowing from the 12 V most vehicles for voltage to flow at the
socket (cigarette cigarette lighter.
lighter) in your vehicle.
No voltage present at Try using another plug socket.
the AC voltage socket.
The inner fan or the This can only be repaired by an author-
cooling element is ised customer services unit.
defective.
The cigarette lighter If the plug of your cooler becomes very
socket is dirty. This warm in the cigarette lighter socket,
results in a poor elec- either the socket must be cleaned or the
trical contact. plug has not been assembled correctly.
The fuse of the 12 V Replace the fuse (5 A) in the 12 V plug
(fig. 2 1, page 3).
plug has blown.
The vehicle fuse has Replace the vehicle's 12 V socket fuse
blown. (usually 15 A). (Please refer to the oper-
ating manual of your vehicle.)
BordBar TF-08