Lighting Instructions - Napoleon 410 Bedienungsanleitung

Lighting Instructions

6
WARNING!
WARNING!
WARNING!
www.napoleongrills.com
Left Burner
Open lid
Ensure all burner controls are in the off position. Turn on the gas supply valve.
Main Tube Burner
Lighting
1. Open grill lid.
2. Push and turn any main burner
knob slowly to the 'hi' position. This
action will ignite the pilot flame which
will in turn light the selected burner. If
the pilot lights, continue to push down
on the control knob until the burner
lights and then release.
3. If the pilot does not ignite, then
immediately turn the control knob
back to the 'off position and repeat
step 1 several times.
.
4. If the pilot and burner will not
ignite within 5 seconds, turn the
control knob to the 'off' position and
wait 5 minutes for any excess gas to
dissipate. Either repeat steps 1 and 2
or light with a match.
If lighting the unit with a match, clip the match into the supplied lighting rod. Hold
the lit match down through the grill and sear plate while turning the corresponding
burner valve to high.
Centre Burner Right Burner
Side Burner Lighting
(If equipped)
1. Open side burner cover.
2. Push and turn side burner control to
high position.
3. Press and hold
igniter button until burner lights, or
light by match
4. If the burner will not ignite within 5
seconds, turn the control knob to the
'off' position and wait 5 minutes for any
excess gas to dissipate. Either repeat
steps 2 and 3 or light with a match.
Side Burner
Off Position