Hilti TE 60-AVR Original Bedienungsanleitung Seite 23

Ø PCM diamond core bits
Ø drill bits for metal
Ø Drill bits for wood
Chuck
4.2 Noise information and vibration values determined in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance
with a standardized test and may be used to compare one electric tool with another. They may be used
for a preliminary assessment of exposure. The data given represents the main applications of the electric
tool. However, if the electric tool is used for different applications, with different accessory tools, or is poorly
maintained, the data may vary. This may significantly increase exposure over the total working period. An
accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This may significantly reduce exposure over the
total working period. Identify additional safety measures to protect the operator from the effects of noise
and/or vibration, for example: maintenance of the electric tool and the accessories, keeping the hands warm,
organization of work patterns.
Noise emission values in accordance with EN 60745
Sound power level (L
WA
Uncertainty for the sound power level (K
Sound pressure level (L
Uncertainty for the sound pressure level (K
Total vibration in accordance with EN 60745
Chiseling (a )
h,Cheq
Hammer drilling in concrete (a
Uncertainty (K)
5 Operation
5.1 Preparations at the workplace
CAUTION
Risk of injury! Inadvertent starting of the product.
▶ Unplug the supply cord before making adjustments to the power tool or before changing
accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1.1 Fitting the side handle
1. Release the side handle clamping band by turning the handle grip.
2. Slide the side handle clamping band over the chuck from the front and into the recess provided.
3. Bring the side handle into the desired position.
4. Tighten the side handle clamping band by turning the handle grip.
5.1.2 Fitting the depth gauge (optional)
1. Release the side handle clamping band by turning the handle grip.
2. Slide the depth gauge from the front into the 2 guide holes provided.
3. Tighten the side handle clamping band by turning the handle grip.
Printed: 28.06.2017 | Doc-Nr: PUB / 5277984 / 000 / 01
TE 60­AVR
•/•
10 mm ... 20 mm
10 mm ... 32 mm
TE­Y
)
)
WA
)
pA
)
pA
)
h, HD
4
5
TE 60-ATC/AVR
42 mm ... 102 mm
10 mm ... 20 mm
10 mm ... 32 mm
TE­Y
TE 60­AVR TE 60-ATC/AVR
107 dB(A) 111 dB(A)
3 dB(A) 3 dB(A)
96 dB(A) 100 dB(A)
3 dB(A) 3 dB(A)
TE 60­AVR TE 60-ATC/AVR
9.0 m/s² 6.0 m/s²
9.6 m/s² 6.4 m/s²
1.5 m/s² 1.5 m/s²
English 17