ENGLISH
INTRODUCTION
NOTE
The numbers in brackets refer to the components shown in Machine Description chapter.
MANUAL PURPOSE AND CONTENTS
The purpose of this Manual is to provide the operator with all necessary information to use the machine properly in a safe and
autonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal.
Before performing any procedure on the machine, the operators and qualiÞ ed technicians must read this Manual carefully. Contact
NilÞ sk Alto in case of doubts concerning the interpretation of the instructions and for any further information.
TARGET
This Manual is intended for operators and technicians qualiÞ ed to perform the machine maintenance.
The operators must not perform procedures reserved for qualiÞ ed technicians. NilÞ sk Alto will not be answerable for damages
coming from the non-observance of this prohibition.
HOW TO KEEP THIS MANUAL
The User Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that can cause
damage to it.
DECLARATION OF CONFORMITY
The declaration of conformity, supplied with the machine, certiÞ es the machine conformity with the law in force.
NOTE
Two copies of the original declaration of conformity are provided together with the machine documentation.
IDENTIFICATION DATA
The machine model and serial number are marked on the plate (1).
The machine model year is written in the declaration of conformity and it is also indicated by the Þ rst two Þ gures of the machine
serial number.
This information is useful when requiring machine spare parts. Use the following table to write down the machine identiÞ cation data.
MACHINE model ...............................................................................
MACHINE serial number ...................................................................
2
Bedienungsanleitung auf www.gluesing.net
USER MANUAL
FLOORTEC R 680 B
1463516000(1)2008-05 A