Temperature and frost alarm
The temperature alarm is a short beep, which sounds as soon as the outdoor
temperature exceeds or falls below the preset temperature range. Follow the below
procedures to set the desired temperature range.
Press the – button
Hold the – button down for 3 seconds. The maximum temperature display
blinks. Press the + or – button to set the values.
Press the MODE button
display blinks. Press the + or – button to set the values.
Press the MODE button to confirm your setting.
Activating / deactivating the the temperature
and frost alarm
If more than one outdoor sensor is activated, press the channel button
select one.
Press the – button
If the frost alarm alarm is activated, the corresponding symbol
the outdoor temperature. The alarm signal sounds at –1 °C to + 3 °C.
144 GB/MT
to get top the temperature alarm mode.
36
to confirm your setting. The minimum temperature
34
repeatedly to activate the temperature and frost alarms.
36
to
37
appears next to
23