Setting The Alarm Time - Auriol Z31915 Bedienungs- Und Sicherheitshinweise

Setting the alarm time

1. Press the MODE button
set waking time appears in the LC display.
2. Press and hold down the MODE button for about 2 seconds. The hours display
flashes.
3. Press the + or – button
4. Confirm your setting by pressing the MODE button. The minutes display flashes.
Repeat step 3 to set the minutes.
5. Confirm your setting by pressing the MODE button.
Tip: Hold the + or – button pressed down. This will speed up the process of
setting the values. You can also use this fast setting option for subsequent settings.
If you do not press any button for 20 seconds, the LCD automatically reverts to
the standard display.
Note: You can set two different alarms separately.
6. Press the MODE button twice briefly if the weather station is in time display
mode. Press the MODE button once briefly if the weather station is in ALARM 1
mode. This brings you now to ALARM 2 mode.
7. Repeat steps 2–5 to set the value for ALARM 2.
briefly in order to get to alarm mode. The currently
34
, to set the desired value.
35 36
7
GB/MT 131