Bosch PAM20001 Gebrauchsanweisung Seite 41

10 sec/
Programming the appliance stop time
❏ Press the "Timer" key
cursor on the timer menu. The last function
programmed appears by default.
❏ Use the "+" and "–" keys to select the
"Stop" function
❏ Use the "down" key (see "up" and "down"
keys) to lower the cursor to the stop time
menu. Then use the "+" and "–" keys to
modify the stop time until the desired time is
reached.
❏ The time changes 15 minutes at a time.
Instructions for Use
, to position the
, (see "+" and "–" keys).
❏ Press the "Timer" key
seconds without touching any keys to
memorise the set stop time.
❏ The set time is displayed on the screen.
10 sec/
Turning the timer off
❏ Press the "Timer" key
cursor on the timer menu. The last function
programmed appears by default.
❏ Use the "+" and "–" keys to select the "Off"
function.
❏ Press the "Timer" key
seconds without touching any keys to turn
the timer off. No set time is displayed on the
screen.
41
, or wait for 10
, to position the
, or wait for 10