Product Description And Specifications - Bosch D-tect 150 SV Professional Originalbetriebsanleitung

Have the measuring tool serviced only by a qualified
u
specialist using only original replacement parts. This
will ensure that the safety of the measuring tool is main-
tained.
Do not use the measuring tool in explosive atmo-
u
spheres which contain flammable liquids, gases or
dust. Sparks may be produced inside the measuring tool,
which can ignite dust or fumes.
The measuring tool may not be 100 % accurate for
u
technological reasons. To eliminate hazards, familiar-
ise yourself with further sources of information, such
as building plans and photographs taken during con-
struction, etc. before carrying out any drilling, sawing
or routing work on walls, ceilings or floors. The accur-
acy of the measuring tool may be affected by environ-
mental influences, such the level of humidity or there be-
ing other electronic devices nearby. The structure and
condition of the walls (e.g. damp, building materials con-
taining metal, electrically conductive wallpaper, insulat-
ing materials, tiles) and the number, type, size and posi-
tion of the objects may distort the measuring results.
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The measuring tool is intended for the detection of objects in
walls, ceilings and floors. Depending on the material and
condition of the base material, it is possible to detect metal
objects, wooden beams, plastic pipes, conductors and
cables. The object depth from the nearest edge of each of
the detected objects is determined.
The measuring tool complies with the limits specified in
EN 302435. On this basis, clarification is required as to
whether the measuring tool can be used in places such as
hospitals, nuclear power plants and in the vicinity of airports
and mobile phone base stations.
The measuring tool is suitable for indoor and outdoor use.
Product features
The numbering of the product features shown refers to the il-
lustration of the measuring tool on the graphic page.
(1) Top marking aid
(2) Wheel
(3) Left and right marking aids
(4) Battery compartment cover
(5) Locking mechanism of the battery compartment
cover
(6) Handle
(7) Maintenance flap
(8) Serial number
Bosch Power Tools
(9) Sensor area
(10) Right select button
(11) Start button
(12) Left select button
(13) Audio signal button
(14) Setup button
(15) On/off button
(16) Display
(17) LED
(18) Protective bag
Display elements
(a) Audio signal indicator
(b) Battery indicator
(c) Display for sensor range
(d) Area already checked
(e) Measuring scale for object depth
(f) Area not yet checked
(g) Outer edges, to be marked left and right via the
marking aid (3)
(h) Operating mode indicator
(i) Black: Detected object is within the sensor range
(j) Grey: Detected object is outside the sensor range
(k) Centre line, corresponds with the marking aid (1)
(l) Object depth indicator
(m) Object material indicator
(n) Live cable indicator
Technical data
Universal detector
Article number
Measuring accuracy to object
A)
centre a
Accuracy of the indicated object depth b
– In dry concrete
– In wet concrete
Minimum distance between two
A)
adjacent objects c
Operating temperature
Storage temperature
Radar sensor
– Operating frequency range
– Max. transmission power
Inductive sensor
– Operating frequency range
– Max. magnetic field strength
(at 10 m)
English | 15
D-tect 150 SV
3 601 K10 008
B)
±5 mm
A)
B)
±5 mm
B)
±10 mm
B)
40 mm
–10 °C to +50 °C
–20 °C to +70 °C
2200–5500 MHz
0.01 mW
5.9–6.1 kHz
72 dBµA/m
1 609 92A 4G1 | (28.08.2018)