Maintenance; Changing The Battery(S); Cleaning - PANCONTROL PAN KLM-2000 Bedienungsanleitung


Use UP and DOWN to select a function, with SET open the edit mode.

With UP and DOWN edit, save with TEST / OK.

With EXIT / POWER you return to the menu.
9.

Maintenance

Only authorized service technicians may repair the instrument.
Note: If the instrument is malfunctioning, please test:
- Battery condition and polarity
- Condition of the fuse(s) if available.
- Condition of the test leads.

Changing the battery(s)

When the battery icon on the display turns red, replace the batteries.

Open the battery compartment

Use only alkaline batteries.

Replace the battery. Mind the correct polarity.

Close the battery compartment.

Disposal of the flat battery should meet environmental standards.

Remove the battery if the device is not used for a long time.

Cleaning

If the instrument is dirty after daily usage, it is advised to clean it by using a
humid cloth and a mild household detergent. Prior to cleaning, ensure that
instrument is switched off and disconnected from external voltage supply and
any other instruments connected. Never use acid detergents or dissolvent for
cleaning.
EN 10