Specifications - Makita 9901 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Lock button
1-2. Switch trigger
2-1. Speed change switch
3-1. Lever

SPECIFICATIONS

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for the sanding of large surface of
wood, plastic and metal materials as well as painted
surfaces.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
For Model 9401
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode : sanding metal plate
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Explanation of general view
5-1. Adjusting knob
6-1. Dust spout
6-2. Dust bag
8-1. Limit mark
Model
Belt size
Belt speed
Overall length
Net weight
Safety class
) : 89 dB(A)
pA
) : 100 dB(A)
WA
value (tri-axial vector
2
) : 2.5 m/s or less
h
2
9401
100 mm x 610 mm
5.8 m/s
374 mm
7.4 kg
ENE052-1
For Model 9402
Noise
The typical A-weighted noise level determined according
to EN60745:
ENF002-1
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Vibration
The vibration
determined according to EN60745:
Work mode : sanding metal plate
Vibration emission (a
Uncertainty (K) : 1.5 m/s
ENG102-3
For Model 9924DB
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
ENG212-2
Sound power level (L
Uncertainty (K) : 3 dB(A)
sum)
Vibration
The vibration
determined according to EN60745:
Work mode : sanding metal plate
Vibration emission (a
Uncertainty (K) : 1.5 m/s
3
9-1. Screwdriver
9-2. Brush holder cap
9402 9901
76 mm x 533 mm
H 5.8 m/s
6.3 m/s
L 5.0 m/s
328 mm
3.3 kg
/II
) : 93 dB(A)
pA
) : 104 dB(A)
WA
Wear ear protection
total value (tri-axial
2
) : 2.5 m/s
h
2
) : 91 dB(A)
pA
) : 102 dB(A)
WA
Wear ear protection
total value (tri-axial
2
) : 2.5 m/s
h
2
9924DB
76 mm x 610 mm
6.6 m/s
355 mm
4.8 kg
ENG102-3
ENG212-2
vector sum)
or less
ENG102-3
ENG212-2
vector sum)
or less