Manual Mode - Klarstein 10031908 Anleitung

Start
After main power is switched on, press the POWER button. The Air Quality indicator
Lamp will light up. It will run in AUTO mode.
Auto run mode
Press the [AUTO] button when the unit in another modes, it will go into the auto run
mode. In the [Auto] mode, the auto indicator will glow and the unit automatically adjust
the air flow depending on the indoor air quality. The Air Quality indicator lamp will glow
to the corresponding level of air quality:
Ring Colour
Air Quality
Sleep mode
Press the [SLEEP] button after the start or in the other mode, it will go into the sleep mode
In this mode the sleep indicator will light and the air purifier will run in speed 1 & 2.

Manual mode

Press the [AIR FLOW] button after the start or in the other mode, it will go into the
manual mode. In this mode the corresponding speed indicator will light and the air
purifier will run in selected speed. You can change the speed by pressing the air flow
selector button.
Timer function
Press the [TIMER] button after the start or in the other mode, it will go into the timer mode
In this mode you can set the specific time between 0.5-24hrs to automatically switch off
the air purifier. The set time will be indi cated on the display.
Light control function
Press the [LIGHTI button to switch ON/OFF the air quality light and air flow indicator.
This function can be used during night, when you do not want any light to disturb your
sleep.
Blue Amber
Good Moderate
Purple Red
Polluted Bad
EN
15