Auerswald COMmander 6000RX Betriebsanleitung Seite 46

Important Information
Connection Options on the COMmander 8UP0 (R) Module
Connection Options on the COMmander 8a/b (R) Module
Connection Options on the COMmander 2TSM (R) Module
Additional Extensions
Door terminal, relay/actuator,
switch input, announcement
output
46
8 internal U ports (1, 2, 3, 4, 5, 6, 7, 8), connection via
P0
RJ-45 socket or spring clamp connection (2-core)
8 internal analogue ports (1, 2, 3, 4, 5, 6, 7, 8), connection
via RJ-45 socket or spring clamp connection (2-core)
2 door terminal ports (door 1 TNF1/TGnd, door 2 TNF2/
TGnd), connection via spring clamp connection (2 x 2-core)
1 power supply outlet (+12Volt, GND),
connection via spring clamp connection (2-core)
6 relay outputs (relay 1 TS11/TS12, relay 2 TO11/TO12,
relay 3 Rel3 com/no/nc, relay 4 TS21/TS22, relay 5 TO21/
TO22, relay 6 Rel6 com/no), connection via spring clamp
connection (5 x 2-core and 1 x 3-core)
4 switch inputs (But1/Klin1, But2/Klin2, But3/Klin3,
But4/Klin4), connection via spring clamp connection (4 x
2-core)
1 relay output second ringer (2nd Bell/Zweitkl.),
connection via spring clamp connection (2-core)
1 announcement output (Audio Out), connection via cinch
socket
1 music input (Audio In), connection via cinch socket
The PBX can additionally be expanded correspondingly by
connecting suitable accessories at the Ethernet port and
the internal analogue port.
COMmander 6000/R/RX - Instructions V11 11/2018