Technical Data - Grizzly BHS 2660 AC E2 Bedienungsanleitung

We will handle units in proper pa-
ckaging and returned postage paid
only.
• Attention: To file a complaint or ser-
vice request at our service address,
please make sure that the unit is cle-
an and that a description of the defect
is included.
Postage not paid - as bulk goods,
express or other special delivery -
returned units will not be accepted
otherwise.
• Defective units returned to us will be
disposed of for free.

Technical data

Petrol hedge trimmer ......BHS 2660 AC E2
Engine ........single-cylinder two-stroke engine
Displacement ...........................................26 cc
Engine power .................................... 0.65 KW
Maximum engine speed ................10000 rpm
Recommended idling speed ...........3000 rpm
Cuts per minute .....................1600 stroke/min
Cutting length .....................................510 mm
Tooth gap ..............................................28 mm
Tank volume, max. .................................0.45 l
Fuel mixture .............................................. 40:1
Weight .................................................... 5,6 kg
Sound power level (LWA)
..................... 109.4 dB(A); KWA = 2 dB(A)
Warranted sound power level ....112 dB(A)
Sound pressure level (LpA)
.........................97.5 dB(A); KpA = 1 dB(A)
Vibration (an)
Front handle ......... 6.79 m/s
Rear handle .......... 4.97 m/s
The specified vibration emission rating
has been benchmarked by a standardised
test method and can be used to compare
different electric tools.
The specified vibration emission rating
can also be used to preliminarily assess
the operator's exposure.
Noise and vibration ratings have been
determined pursuant to the standards and
regulations specified in the declaration of
conformity.
Subject to technical and optical modifica-
tions without prior notice in the course of
advancement. There is thus no guarantee
for any sizes, notices or details contained
in these operating instructions. These
operating instructions cannot therefore be
used as justification of any legal claims.
; K = 1.5 m/s
2 2
; K = 1.5 m/s
2 2
Warning:
Depending on how the electric tool
is used, the actual vibration emis-
sion rating during operation may
differ from the specified one.
It is therefore necessary to take
safety precautions with regard to
the operator. Such precautions are
based on the assessed exposure
under actual operative conditions
(taking into account all parts of the
operating cycle such as downtimes
of the electric tool or times at which
the tool is turned on but is running
at no load).
GB
91