Adjusting The Rear View Mirrors; Adjusting The Armrests - Vermeiren Eris Gebrauchsanweisung

3.6

Adjusting the rear view mirrors

It is possible to adjust the rear view mirrors:
3.7

Adjusting the armrests

L
CAUTION: Risk of tipping over - Make sure that the armrests are positioned symmetrically
from the seat.
L
CAUTION: Risk of injury - Mount the inner tube always with of safe distance of 50 mm in
the outer tube.
The armrest can be adjusted in width.
Adjustment 1 (arrow A):
1. Grasp the rear view mirror
2. Rotate the rear view mirror
Or
Adjustment 2 (arrow B):

1. Move the cap upwards.
2. Loosen the mirror screw.

3. Grasp the tube gently.

4. Rotate the tube and put the mirror
position.
3.7.1 Adjusting width armrests
1. Remove the star knob
2. Grasp the inner square tube as shown in the picture.
3. Move these tube to adjust the armrest to the desired
width (range 100 mm on each side).
4. Retighten the star knob
5. Check that the armrest is fixated very well.
Page 23

.

in the desired position.

in the desired

on the back of the scooter.

.
Eris
2018-04