Error Messages - OEG KMS Bedienungsanleitung

Selecting the P1 or P2 time program:
For the mixing and direct heating circuits there are two time programs (P1 and P2) avail-
able. You can select the desired time program by pressing the navigation button. Mark P1
or P2 begins to flash. Now you can select the desired time program by turning the naviga-
tion button and confirm the selection with pressing the button again.

ERROR MESSAGES

Error message.
A sensor that is not
working properly.
If you notice any unexpected behavior of the controller, it
is probable that one of the sensors is malfunctioning.
You can test the proper operation of the sensors in base
display by turning the navigation button. If a sensor is not
working properly, an indicator
next to its symbol for temperature.
Temperature sensors status description :
- - - Sensor is not connected.
Cable or sensor is disconnected.
Sensor short circuited.
15
or appears
U s e r m a n u a l