DIMM Slots
Memory module installation recommendation
DIMMA2
Important
Always insert memory modules in the DIMMA2 slot first.
y
Due to chipset resource usage, the available capacity of memory will be a little less
y
than the amount of installed.
Based on CPU specification, the Memory DIMM voltage below 1.35V is suggested to
y
protect the CPU.
Please note that the maximum capacity of addressable memory is 4GB or less
y
for 32-bit Windows OS due to the memory address limitation. Therefore, we
recommended that you to install 64-bit Windows OS if you want to install more than
4GB memory on the motherboard.
Some memory may operate at a lower frequency than the marked value when
y
overclocking due to the memory frequency operates dependent on its Serial Presence
Detect (SPD). Go to BIOS and find the Memory Try It! to set the memory frequency if
you want to operate the memory at the marked or at a higher frequency.
It is recommended to use a more efficient memory cooling system for full DIMMs
y
installation or overclocking.
The stability and compatibility of installed memory module depend on installed CPU
y
and devices when overclocking.
DIMMA1
Channel A
DIMMA2
DIMMB2
DIMMA2
DIMMB1
Channel B
DIMMB2
DIMMB2
DIMMB1
DIMMA2
DIMMA1
Overview of Components
17