Scanning Interfaces - Xerox DocuMate 3640 Benutzerhandbuch

Scanning Interfaces

If you selected the recommended installation options (see page 7), then you have several different
options to scan with your Xerox DocuMate 3640 scanner. Each method scans equally well, so use the
one with appropriate options for the item you are scanning.
•• One Touch——When you press the Simplex or Duplex button, the item in the scanner is scanned
using the scan settings indicated by the LED number. The scanned image is then sent to a software
application or location on your computer. You can also scan using the on-screen One Touch button
interface. The One Touch software is where you configure the settings for the Scan button. See
“"Scanning From One Touch”" on page 25.
•• TWAIN Interface——This option uses your scanner’'s TWAIN interface to scan. Select scanning
options before scanning, put the document in the scanner, then click the Scan button in the TWAIN
interface window. See “"Scanning from TWAIN”" on page 63.
•• Windows Image Acquisition (WIA)——This option uses the Microsoft Windows set of choices for
scanning. Select the WIA scan settings, put the document in the scanner, then click the Scan
button in the WIA window. See “"Scanning from WIA”" on page 77.
•• ISIS Interface——This option uses the ISIS interface for scanning. Select the ISIS scan settings, put
the document in the scanner, then click the Preview Scan button in the ISIS window. See “"Scanning
from ISIS”" on page 81.
Loading Documents to Scan
DocuMate 3640
User’'s Guide
23