Setup 6: Adjusting The Height And Tilt; Selecting The Input Signal (Input Button) (Sdm-S74E Only) - Sony SDM-S73E Bedienungsanleitung

Setup 6: Adjusting the height and
tilt
This display can be adjusted within the angles shown below.
Hold both sides of the LCD panel, then adjust screen
angles.
To use the monitor comfortably
Adjust the viewing angle of your monitor according to the height
of your desk and chair, so that light is not reflected from the screen
to your eyes.
Note
When adjusting the screen height and tilt, proceed slowly and carefully,
making sure not to hit the monitor against the desk.
10
approx.
approx.
5°
30°
approx.
60 mm
3
(2 /
8
inches)
Selecting the input signal
(INPUT button) (SDM-S74E only)
Press the m/M buttons.
The input signal change each time you press these buttons.
INPUT
On-screen message
(Appears about 5 seconds on
the upper left corner.)
INPUT1 : DVI-D
INPUT2 : HD15
Input signal configuration
DVI-D input connector
(digital RGB) for INPUT1
HD15 input connector
(analog RGB) for INPUT2