4.6 Removing Jammed Paper
4.6.1 Removing Jam in Printer Mechanism
1
Turn the printer power off.
2
Cut the paper roll at the point near the paper slot.
3
Move the knobs at both sides in the arrow direction to detach the auto cutter from the
printer mechanism.
4
Lift the head up lever to detach the head from the platen roller.
5
Turn the knob of the printer mechanism and remove the paper chip remaining in the
paper path completely.
6
Press the head up lever down to return the printer mechanism to the original position.
Printer Mechanism Knob
CAUTION
• Do not access the printer head just after printing operation because the print head remains
hot.
• Do not touch the surface of the heated portion of the head with a bare hand or with a metal
tool.
Head up Lever
Knob
— 23 —