Maintanance And Cleaning - Klarstein Mister Eco Anleitung

EN
16

MAINTANANCE AND CLEANING

Replacing the dust bag
1. After removing the flexible tube, open front cover by pressing the button and pulling
upwards.
2. Remove the dust bag.
3. Insert a new dust bag (dust bag size: SWIRL PH96).
Replacing the filter
1. The motor filter protects the motor ogainst dust residue. It is located between the
paper filter and the motor, and is removed after first opening the vacuum cleaner.
The filter must be replaced, if it is obviously damaged. Otherwise simply shake
or blow the dust out. Replace the filter in its housing. Ensure that the filter is sitting
straight in its housing and closes evenly. The exhaust air tiller ensures clean air
during the vacuuming process. The filter should be replaced regularly whenever it
becomes dirty.
2. To remove the exhaust air filter, open the vacuum cleaner and remove the filter grill.
Now remove the filter from the grill. Insert the new filter into the grill and refit it to the
rear side of the unit. Ensure that the filter is sitting straight in its housing and closes
flush.