Conformity; Exemption From Liability - Flex RS 11-28 Originalbetriebsanleitung

435.953_RS 11-28_230V.book Seite 18 Freitag, 6. November 2015 3:10 15

conformity

We declare on our sole responsibility that the
product described under "Technical data"
conforms to the following standards or
normative documents:
EN 60745 according to the provisions of
Directives 2004/108/EC (up to 19.04.2016),
2014/30/EU (from 20.04.2016), 2006/42/EC,
2011/65/EC.
Responsible for technical documents:
FLEX-Elektrowerkzeuge GmbH, R & D
Bahnhofstrasse 15, D-71711 Steinheim/Murr
05.10.2015
FLEX-Elektrowerkzeuge GmbH
Bahnhofstrasse 15, D-71711 Steinheim/Murr
18

Exemption from liability

The manufacturer and his representative are
not liable for any damage and lost profits due
to interruption in business caused by the
product or by an unusable product.
The manufacturer and his representative are
not liable for any damage which was caused
by improper use of the power tool or by use of
the power tool with products from other
manufacturers.
RS 11-28