Application Areas - Beurer FC 40 Gebrauchsanweisung

6. Move the attachment over your face. Make sure that you do not move the attach­
ment over one part of the face more than once. Further details on treatment can
be found in Section "6.5 Application areas".
Note
The pressure you apply when using the device should be comfortable
and not painful. Some slight reddening should be expected after use.
7. To end use, press the ON/OFF button. The
intensity and battery state indicator goes out.
8. Change the filter after each use. To do so,
turn the attachment to lift it off; then remove
the cover below it. Use tweezers to remove
the filter.

6.5 Application areas

Note
Ensure that the part of your face you are treating is taut when you move
the device over the skin. You can do this by pulling the skin taut to the side
or downwards with your free hand.
Do not use the device on the same area of skin for a long period of time.
Forehead:
Move the device slowly and evenly outwards from
the centre of the forehead. Make sure that you do
not treat any part of your skin more than once.
Temples:
Move the device outwards towards your hairline.
Repeat this on the left and right of the nose. Ensure
that the device is at least 1 cm away from your eyes.
23