Wrist Belt; Battery Charger; Operating Modes; Frquency Mode "Vfo - Midland CT 510 Bedienungsanleitung

Wrist belt

Lace the wrist belt through the hole on the back of the radio.

Battery charger

When the display shows the icon
out of power and needs to be recharged.
1. Charging with wall adaptor only. CT 510 can be charged directly
with the wall adaptor (EXT DC jack).
2. Desktop charger. The battery recharge can also be done with the
supplied desktop charger: there's no need of the whole radio, just
place the battery pack into the proper cradle. The red led indicates
that the battery is being charged, while the green led means that
the recharge has been completed.
3. USB power supply cable. If you have a PC, the battery can be char-
ged with the supplied USB power cable.
The icon will inform you about the battery status.
Icon
Blinking
Full
40 |
it means that the battery pack is
State
Charging
Completed
Instruction Guide Midland CT510
RE SE T
YE S ?

Operating modes

Frquency Mode "VFO"

DEL ?
In this mode, you can use the POWER/DIAL knob to change the fre-
quency or input the frequency by keypad directly.

Memory Mode "MR"

Under VFO mode, if you have stored one memory channel at least, press
VFO to enter Memory mode MR.
The display will show the frequency and the channel number at the left
DEL ?
1 2
top.

Channel Mode "CH"

When you have stored one memory channel at least, turn on the radio
while keeping pressed ENT: you enter CH mode.

Modo FM

CT 510 operates also on the FM radio frequency FM: 88.00 – 108.00 MHz.
To set the scan frequency range and store your favorite channels, see
paragraph "Shortcut operations", step 7.

MENU mode

To enter MENU mode, press F/ and ENT. The options to choose are 26 in
total. See chapter "Menu operations".
Instruction Guide Midland CT510 | 41