RIDGID SeekTech SR-20 Bedienungsanleitung Seite 8

Starting Up
After pressing the Power Key
logo displays, and the software version number will appear
on the left of the screen.
Figure 9: Start-up Screen
Set Up
Once the SR-20 is up and running the next step is to set up
the frequencies needed that match the transmitter or line to
be located.
Checked-Active frequencies are already selected for use and
appear in sequence by pressing the Frequency Key
example, the line trace frequency of 33 kHz is available by
pressing the Frequency Key.)
Figure 10: Frequency Key
Figure 11: Line Trace Frequency
Selected with Frequency Key
on the keypad, the RIDGID
. (For
Ridge Tool Company
seekTech sR-20
Activating Frequencies
Frequencies can be chosen for the set of Checked-Active
frequencies so they will be available using the Frequency
Key .
Each frequency is activated by choosing it from a list in the
Main Menu (See Figure 13). Frequencies are grouped by
category:
Sonde
Active Line Trace
Passive Line Trace
Radio
1. Push the Menu Key
Figure 12: Menu Key
The Main Menu screen is then activated:
Figure 13: Main Menu
2. Using the Up and Down Keys, highlight the
frequency desired (Figure 14). In this example, the
operator is activating a 128 Hz frequency.
Figure 14: Highlighting a Desired Frequency (128 Hz)
Tools For The Professional
:
TM