Operating Instructions; Settings - Exibel BDX1400 Bedienungsanleitung

6. Operating instructions

• Connect one end of the mains lead to the speaker and the other end to a wall socket.
• Set the power switch (12) to the ON position.
• The speaker will start in standby mode, with the [
the display (10).
Switching the speaker on
1. Turn the speaker on (activate) by pressing the standby button [ ] (1) or [ ] (15) on
the remote control.
2. The display and control panel will shine fully when the speaker is active.
Selecting an input source
Press [ IN ] (2) or [ INPUT ] (16) the required number of times until the desired input
source appears.
DAB

7. Settings

Press [ SET ] (3) or [ SETUP ] (20) the required number of times until the desired setting
appears (sub-menu). The name of the selected setting and current setting will be
shown on the display.
Set time
Bass
Set time (time settings)
1. Make sure that "Set time" shows on the display.
2. Press [ ENTER ] (24) to begin setting the time.
3. The hour setting will begin flashing. Set the correct hour using [ I◄◄ ] (17)
and [ ►►I ] (23).
4. Press [ ENTER ] (24) to confirm your selection. Set the minutes in the same way.
5. The set time will then be displayed. Note: The clock only has a 24-hour display format.
With the control panel you can set the time directly using [ I◄◄ ] (5) or [ ►►I ] (6)
in the "Set time" mode. Confirm by pressing [ SET ] (3).
Note: The time must be reset if the speaker is turned off using the power switch (12).
Set sleep time (automatic sleep timer settings)
1. Make sure that "Set sleep time" is shown on the display.
2. Press [ ENTER ] (24) to begin setting the sleep timer.
BT
FM
Set sleep time
Treble
8
] (1) appearing dimly lit on
AUX
Set alarm