Technical Data - Eschenbach mobilux DIGITAL Inspection Bedienungsanleitung

Reset
If the testing device stops working as described in this manual, it may be due a fault
that you can rectify yourself by resetting the testing device. Insert a small, pointed
object carefully into the opening labelled 'RESET' (i) and press the switch contained
inside it.

Technical data

Display size:
Zoom range:
Operating time:
Charging time:
Card formats supported:
System voltage of the charger:
Temperature range:
Weight:
Device complies with UVC specification.
This manual is also available on the Internet on http://www.eschenbach-optik.com/
®
USB is a registered trademark of USB Implementers Forum, Inc.
®
Microsoft , Windows
marks of the Microsoft Corporation in the United States and/or other countries.
System requirements: mobilux DIGITAL Inspection
Operating systems:
Other software:
Installation memory requirements:
Connection:
Processor:
RAM:
Screen resolution:
BDA_mobilux_DIGITAL_Inspection_A5_EN_FR_ES_IT_CMYK.indd 30
11.0 cm (4.3")
4
×
approx. 3 hours
approx. 2 hours
SD, SDHC (max. 32 GB)
100 V–240 V~, 50–60 Hz
10°C–40°C
230 g
®
and Windows Vista
Microsoft Windows Vista / 7 / 8 / 10
Microsoft Visual C++ 2010 SP1
Redistributable Package
approx. 20 MB hard disk space
USB 2.0
Intel
recommended
1 GB
1280 × 768 or higher recommended
, 5 , 6 , 8 , 10
× × × ×
TM
are registered trademarks or trade-
®
Core™2 Duo or comparable
- 30 -
Technical data
, 12 , 15
× ×
11.12.2015 12:34:10